Vent-A-Hood 48 x 32-Inch 1035 CFM Stainless Steel M-Series Hood with Internal Blower
Vent-A-Hood 48-Inch M-Series 1035 CFM 304 Stainless Steel Euro-Style Wall Mount Range Hood
|
Since 1933, Vent-A-Hood has been the gold standard in residential ventilation, trusted by homeowners who refuse to compromise on air quality or craftsmanship. The M-Series combines a Euro-style wall mount profile with the powerful M1200 blower motor, delivering 1,035 CFM of airflow through industrial-grade stainless steel baffle filters with four-speed precision control. This 48-inch model pairs full-width coverage with an extended 32-inch deep canopy, providing the largest M-Series capture zone for homeowners who operate wide outdoor grills and professional cooktops. |
Performance & Power
✓ 1,035 CFM M1200 Blower
✓ 6.6 Sones at High Speed
✓ 4-Speed Variable Control
✓ VP566 Transition Included
Filtration & Safety
✓ Industrial-Grade Baffle Filters
✓ Dishwasher-Safe Baffles
✓ Grease & Smoke Containment
✓ LED Lighting with Dimming
American Craftsmanship
✓ 304-Grade Stainless Steel Body
✓ Extended 32-Inch Deep Canopy
✓ 48-Inch Full-Width Coverage
✓ Proudly Made in the USA
Key Features & Owner Benefits:
- Powerful M1200 Blower Motor: The M1200 internal blower delivers a full 1,035 CFM of airflow at just 6.6 Sones, providing the power needed to clear heavy smoke, grease, and cooking odors from high-heat grilling, searing, and wok cooking on large-format cooktops and outdoor grills.
- 48-Inch Full-Width Coverage: The widest M-Series format provides complete edge-to-edge coverage over large-format professional cooktops and 48-inch outdoor grills, eliminating the dead zones that narrower hoods leave at the outer burners.
- Extended 32-Inch Capture Depth: Five inches deeper than a standard 27-inch canopy, the 32-inch active depth provides a significantly larger capture zone directly over the cooking surface, containing more grease and smoke before it can escape into covered patio areas or adjacent living spaces.
- Industrial-Grade Stainless Steel Baffle Filters: Professional-grade stainless steel baffles intercept airborne grease before it can enter the ductwork, protecting your ventilation system and reducing the risk of grease-related fire hazards over time. Baffles are removable and dishwasher-safe for easy maintenance.
- 4-Speed Blower Control: Four distinct fan speed settings give you precise airflow control — from a gentle background setting for light cooking to full 1,035 CFM power for high-heat grilling and searing.
- 304-Grade Stainless Steel Construction: Heavy-gauge 304-grade stainless steel resists corrosion, UV exposure, and temperature extremes, ensuring the hood maintains structural integrity and appearance in demanding outdoor environments.
- VP566 Transition & 10-Inch Round Ducting: The included VP566 transition adapter connects the M1200 blower directly to 10-inch round ducting for straightforward installation with no additional adapters or modifications required.
- Variable LED Lighting with 2-Level Dimming: Integrated LED lights cover the full 48-inch cooking surface, providing bright task lighting for active cooking and a dimmed setting for low-light grilling sessions.
Maximum M-Series Coverage for Large Outdoor Kitchens
The Vent-A-Hood 48-Inch M-Series Hood with 32-inch depth delivers the largest capture zone in the M-Series lineup — a commercial-style ventilation system engineered for homeowners who operate wide outdoor grills and professional cooktops that demand both full-width and extended-depth coverage. Since 1933, Vent-A-Hood has focused exclusively on ventilation engineering — a single-category expertise that has produced innovations no full-line appliance manufacturer has replicated.
The M1200 blower motor is the workhorse of the M-Series lineup. At 1,035 CFM with four-speed control, it delivers enough power to handle professional-style cooking equipment, high-BTU gas burners, and large-format outdoor grills while giving the cook precise speed adjustment for lighter tasks. At just 6.6 Sones at high speed, the M1200 keeps noise levels manageable even in open-air entertaining environments where conversation matters.
This model combines two critical sizing advantages into one unit. The 48-inch width provides complete edge-to-edge coverage over large-format cooktops and wide outdoor grills, while the 32-inch canopy depth — five inches deeper than the standard 27-inch configuration — extends further over the front of the cooking surface where smoke and grease escape most readily during high-heat grilling and searing. Together, these dimensions create the largest active capture area available in the M-Series.
Industrial-grade stainless steel baffle filters are the M-Series filtration system. Unlike mesh filters that clog quickly and require frequent replacement, stainless steel baffles redirect airflow to separate grease from the air stream, channeling it away from the ductwork. The baffles are removable and dishwasher-safe. The Euro-style wall mount design complements professional-style kitchens, and the entire unit is constructed from heavy-gauge 304-grade stainless steel. The hood is rated for outdoor use on covered patios when installed with a GFCI-protected circuit, with a recommended mounting height of 30 inches above the cooking surface.
5 Reasons to Choose Vent-A-Hood Over Cheaper Alternatives
01
Largest M-Series Capture Zone
At 48 inches wide and 32 inches deep, this hood provides the largest active capture area in the M-Series — complete coverage over professional cooktops and large outdoor grills.
02
1,035 CFM of Real Power
The M1200 blower delivers serious airflow for high-heat cooking, professional-style ranges, and outdoor grills — power that budget hoods simply cannot match.
03
Professional Baffle Filtration
Industrial-grade stainless steel baffles separate grease from the air stream and protect your ductwork — the same filtration technology used in commercial restaurant kitchens.
04
Dishwasher-Safe Maintenance
Stainless steel baffle filters snap out and go straight into the dishwasher — no hand-scrubbing mesh screens, no solvents, no special tools required.
05
90 Years of Ventilation Expertise
Vent-A-Hood has done one thing since 1933 — build range hoods. That single-category focus produces a level of engineering no full-line appliance brand can match.
Technical Documentation & Warranty
Download Installation Instructions | Download Technical Specifications
|
5-Year Limited Warranty Vent-A-Hood warrants their products to be free from defects in workmanship and materials for a period of five (5) years from the date of purchase. Labor is not included in the warranty coverage. Please refer to the manufacturer's manual for complete warranty details. |
Specs & Dimensions
Vent-A-Hood 48-Inch M-Series Range Hood (Euro-Style) |
|
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Class | M-Series |
| Collection Name | Vent-A-Hood Vent Hoods |
| Hood Style | Euro-Style Wall Mount |
| Mounting Type | Wall Mount / Canopy |
| Venting Type | Ducted |
| Approved For Outdoor Use | Yes (Covered Patio, GFCI Required) |
| Made in the USA | Yes |
| Blower & Performance | |
| Blower Type | Internal (M1200) |
| CFM (Cubic Feet/Min) | 1,035 CFM |
| Fan Speed Settings | 4 Speeds |
| Technology | M-Series Blower Motor with Baffle Filtration |
| Transition Included | Yes (VP566 Transition) |
| Duct Connection Size | 10" Round |
| Physical Dimensions | |
| Overall Width | 48 Inches |
| Overall Depth | 32 Inches |
| Overall Height | 18 Inches |
| Rec. Mounting Height | 30" Above Cooking Surface |
| Materials & Lighting | |
| Exterior Material | 304-Grade Stainless Steel |
| Primary Color | Stainless Steel |
| Filter Type | Industrial-Grade Stainless Steel Baffles |
| Lighting | LED with Variable 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Commercial Grade | No |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Vent-A-Hood 48 x 32-Inch 1035 CFM Stainless Steel M-Series Hood with Internal Blower
Vent-A-Hood 48 x 32-Inch 1035 CFM Stainless Steel M-Series Hood with Internal Blower
Vent-A-Hood 48-Inch M-Series 1035 CFM 304 Stainless Steel Euro-Style Wall Mount Range Hood
|
Since 1933, Vent-A-Hood has been the gold standard in residential ventilation, trusted by homeowners who refuse to compromise on air quality or craftsmanship. The M-Series combines a Euro-style wall mount profile with the powerful M1200 blower motor, delivering 1,035 CFM of airflow through industrial-grade stainless steel baffle filters with four-speed precision control. This 48-inch model pairs full-width coverage with an extended 32-inch deep canopy, providing the largest M-Series capture zone for homeowners who operate wide outdoor grills and professional cooktops. |
Performance & Power
✓ 1,035 CFM M1200 Blower
✓ 6.6 Sones at High Speed
✓ 4-Speed Variable Control
✓ VP566 Transition Included
Filtration & Safety
✓ Industrial-Grade Baffle Filters
✓ Dishwasher-Safe Baffles
✓ Grease & Smoke Containment
✓ LED Lighting with Dimming
American Craftsmanship
✓ 304-Grade Stainless Steel Body
✓ Extended 32-Inch Deep Canopy
✓ 48-Inch Full-Width Coverage
✓ Proudly Made in the USA
Key Features & Owner Benefits:
- Powerful M1200 Blower Motor: The M1200 internal blower delivers a full 1,035 CFM of airflow at just 6.6 Sones, providing the power needed to clear heavy smoke, grease, and cooking odors from high-heat grilling, searing, and wok cooking on large-format cooktops and outdoor grills.
- 48-Inch Full-Width Coverage: The widest M-Series format provides complete edge-to-edge coverage over large-format professional cooktops and 48-inch outdoor grills, eliminating the dead zones that narrower hoods leave at the outer burners.
- Extended 32-Inch Capture Depth: Five inches deeper than a standard 27-inch canopy, the 32-inch active depth provides a significantly larger capture zone directly over the cooking surface, containing more grease and smoke before it can escape into covered patio areas or adjacent living spaces.
- Industrial-Grade Stainless Steel Baffle Filters: Professional-grade stainless steel baffles intercept airborne grease before it can enter the ductwork, protecting your ventilation system and reducing the risk of grease-related fire hazards over time. Baffles are removable and dishwasher-safe for easy maintenance.
- 4-Speed Blower Control: Four distinct fan speed settings give you precise airflow control — from a gentle background setting for light cooking to full 1,035 CFM power for high-heat grilling and searing.
- 304-Grade Stainless Steel Construction: Heavy-gauge 304-grade stainless steel resists corrosion, UV exposure, and temperature extremes, ensuring the hood maintains structural integrity and appearance in demanding outdoor environments.
- VP566 Transition & 10-Inch Round Ducting: The included VP566 transition adapter connects the M1200 blower directly to 10-inch round ducting for straightforward installation with no additional adapters or modifications required.
- Variable LED Lighting with 2-Level Dimming: Integrated LED lights cover the full 48-inch cooking surface, providing bright task lighting for active cooking and a dimmed setting for low-light grilling sessions.
Maximum M-Series Coverage for Large Outdoor Kitchens
The Vent-A-Hood 48-Inch M-Series Hood with 32-inch depth delivers the largest capture zone in the M-Series lineup — a commercial-style ventilation system engineered for homeowners who operate wide outdoor grills and professional cooktops that demand both full-width and extended-depth coverage. Since 1933, Vent-A-Hood has focused exclusively on ventilation engineering — a single-category expertise that has produced innovations no full-line appliance manufacturer has replicated.
The M1200 blower motor is the workhorse of the M-Series lineup. At 1,035 CFM with four-speed control, it delivers enough power to handle professional-style cooking equipment, high-BTU gas burners, and large-format outdoor grills while giving the cook precise speed adjustment for lighter tasks. At just 6.6 Sones at high speed, the M1200 keeps noise levels manageable even in open-air entertaining environments where conversation matters.
This model combines two critical sizing advantages into one unit. The 48-inch width provides complete edge-to-edge coverage over large-format cooktops and wide outdoor grills, while the 32-inch canopy depth — five inches deeper than the standard 27-inch configuration — extends further over the front of the cooking surface where smoke and grease escape most readily during high-heat grilling and searing. Together, these dimensions create the largest active capture area available in the M-Series.
Industrial-grade stainless steel baffle filters are the M-Series filtration system. Unlike mesh filters that clog quickly and require frequent replacement, stainless steel baffles redirect airflow to separate grease from the air stream, channeling it away from the ductwork. The baffles are removable and dishwasher-safe. The Euro-style wall mount design complements professional-style kitchens, and the entire unit is constructed from heavy-gauge 304-grade stainless steel. The hood is rated for outdoor use on covered patios when installed with a GFCI-protected circuit, with a recommended mounting height of 30 inches above the cooking surface.
5 Reasons to Choose Vent-A-Hood Over Cheaper Alternatives
01
Largest M-Series Capture Zone
At 48 inches wide and 32 inches deep, this hood provides the largest active capture area in the M-Series — complete coverage over professional cooktops and large outdoor grills.
02
1,035 CFM of Real Power
The M1200 blower delivers serious airflow for high-heat cooking, professional-style ranges, and outdoor grills — power that budget hoods simply cannot match.
03
Professional Baffle Filtration
Industrial-grade stainless steel baffles separate grease from the air stream and protect your ductwork — the same filtration technology used in commercial restaurant kitchens.
04
Dishwasher-Safe Maintenance
Stainless steel baffle filters snap out and go straight into the dishwasher — no hand-scrubbing mesh screens, no solvents, no special tools required.
05
90 Years of Ventilation Expertise
Vent-A-Hood has done one thing since 1933 — build range hoods. That single-category focus produces a level of engineering no full-line appliance brand can match.
Technical Documentation & Warranty
Download Installation Instructions | Download Technical Specifications
|
5-Year Limited Warranty Vent-A-Hood warrants their products to be free from defects in workmanship and materials for a period of five (5) years from the date of purchase. Labor is not included in the warranty coverage. Please refer to the manufacturer's manual for complete warranty details. |
Specs & Dimensions
Vent-A-Hood 48-Inch M-Series Range Hood (Euro-Style) |
|
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Class | M-Series |
| Collection Name | Vent-A-Hood Vent Hoods |
| Hood Style | Euro-Style Wall Mount |
| Mounting Type | Wall Mount / Canopy |
| Venting Type | Ducted |
| Approved For Outdoor Use | Yes (Covered Patio, GFCI Required) |
| Made in the USA | Yes |
| Blower & Performance | |
| Blower Type | Internal (M1200) |
| CFM (Cubic Feet/Min) | 1,035 CFM |
| Fan Speed Settings | 4 Speeds |
| Technology | M-Series Blower Motor with Baffle Filtration |
| Transition Included | Yes (VP566 Transition) |
| Duct Connection Size | 10" Round |
| Physical Dimensions | |
| Overall Width | 48 Inches |
| Overall Depth | 32 Inches |
| Overall Height | 18 Inches |
| Rec. Mounting Height | 30" Above Cooking Surface |
| Materials & Lighting | |
| Exterior Material | 304-Grade Stainless Steel |
| Primary Color | Stainless Steel |
| Filter Type | Industrial-Grade Stainless Steel Baffles |
| Lighting | LED with Variable 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Commercial Grade | No |
Original: $3,975.00
-65%$3,975.00
$1,391.25Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Vent-A-Hood 48-Inch M-Series 1035 CFM 304 Stainless Steel Euro-Style Wall Mount Range Hood
|
Since 1933, Vent-A-Hood has been the gold standard in residential ventilation, trusted by homeowners who refuse to compromise on air quality or craftsmanship. The M-Series combines a Euro-style wall mount profile with the powerful M1200 blower motor, delivering 1,035 CFM of airflow through industrial-grade stainless steel baffle filters with four-speed precision control. This 48-inch model pairs full-width coverage with an extended 32-inch deep canopy, providing the largest M-Series capture zone for homeowners who operate wide outdoor grills and professional cooktops. |
Performance & Power
✓ 1,035 CFM M1200 Blower
✓ 6.6 Sones at High Speed
✓ 4-Speed Variable Control
✓ VP566 Transition Included
Filtration & Safety
✓ Industrial-Grade Baffle Filters
✓ Dishwasher-Safe Baffles
✓ Grease & Smoke Containment
✓ LED Lighting with Dimming
American Craftsmanship
✓ 304-Grade Stainless Steel Body
✓ Extended 32-Inch Deep Canopy
✓ 48-Inch Full-Width Coverage
✓ Proudly Made in the USA
Key Features & Owner Benefits:
- Powerful M1200 Blower Motor: The M1200 internal blower delivers a full 1,035 CFM of airflow at just 6.6 Sones, providing the power needed to clear heavy smoke, grease, and cooking odors from high-heat grilling, searing, and wok cooking on large-format cooktops and outdoor grills.
- 48-Inch Full-Width Coverage: The widest M-Series format provides complete edge-to-edge coverage over large-format professional cooktops and 48-inch outdoor grills, eliminating the dead zones that narrower hoods leave at the outer burners.
- Extended 32-Inch Capture Depth: Five inches deeper than a standard 27-inch canopy, the 32-inch active depth provides a significantly larger capture zone directly over the cooking surface, containing more grease and smoke before it can escape into covered patio areas or adjacent living spaces.
- Industrial-Grade Stainless Steel Baffle Filters: Professional-grade stainless steel baffles intercept airborne grease before it can enter the ductwork, protecting your ventilation system and reducing the risk of grease-related fire hazards over time. Baffles are removable and dishwasher-safe for easy maintenance.
- 4-Speed Blower Control: Four distinct fan speed settings give you precise airflow control — from a gentle background setting for light cooking to full 1,035 CFM power for high-heat grilling and searing.
- 304-Grade Stainless Steel Construction: Heavy-gauge 304-grade stainless steel resists corrosion, UV exposure, and temperature extremes, ensuring the hood maintains structural integrity and appearance in demanding outdoor environments.
- VP566 Transition & 10-Inch Round Ducting: The included VP566 transition adapter connects the M1200 blower directly to 10-inch round ducting for straightforward installation with no additional adapters or modifications required.
- Variable LED Lighting with 2-Level Dimming: Integrated LED lights cover the full 48-inch cooking surface, providing bright task lighting for active cooking and a dimmed setting for low-light grilling sessions.
Maximum M-Series Coverage for Large Outdoor Kitchens
The Vent-A-Hood 48-Inch M-Series Hood with 32-inch depth delivers the largest capture zone in the M-Series lineup — a commercial-style ventilation system engineered for homeowners who operate wide outdoor grills and professional cooktops that demand both full-width and extended-depth coverage. Since 1933, Vent-A-Hood has focused exclusively on ventilation engineering — a single-category expertise that has produced innovations no full-line appliance manufacturer has replicated.
The M1200 blower motor is the workhorse of the M-Series lineup. At 1,035 CFM with four-speed control, it delivers enough power to handle professional-style cooking equipment, high-BTU gas burners, and large-format outdoor grills while giving the cook precise speed adjustment for lighter tasks. At just 6.6 Sones at high speed, the M1200 keeps noise levels manageable even in open-air entertaining environments where conversation matters.
This model combines two critical sizing advantages into one unit. The 48-inch width provides complete edge-to-edge coverage over large-format cooktops and wide outdoor grills, while the 32-inch canopy depth — five inches deeper than the standard 27-inch configuration — extends further over the front of the cooking surface where smoke and grease escape most readily during high-heat grilling and searing. Together, these dimensions create the largest active capture area available in the M-Series.
Industrial-grade stainless steel baffle filters are the M-Series filtration system. Unlike mesh filters that clog quickly and require frequent replacement, stainless steel baffles redirect airflow to separate grease from the air stream, channeling it away from the ductwork. The baffles are removable and dishwasher-safe. The Euro-style wall mount design complements professional-style kitchens, and the entire unit is constructed from heavy-gauge 304-grade stainless steel. The hood is rated for outdoor use on covered patios when installed with a GFCI-protected circuit, with a recommended mounting height of 30 inches above the cooking surface.
5 Reasons to Choose Vent-A-Hood Over Cheaper Alternatives
01
Largest M-Series Capture Zone
At 48 inches wide and 32 inches deep, this hood provides the largest active capture area in the M-Series — complete coverage over professional cooktops and large outdoor grills.
02
1,035 CFM of Real Power
The M1200 blower delivers serious airflow for high-heat cooking, professional-style ranges, and outdoor grills — power that budget hoods simply cannot match.
03
Professional Baffle Filtration
Industrial-grade stainless steel baffles separate grease from the air stream and protect your ductwork — the same filtration technology used in commercial restaurant kitchens.
04
Dishwasher-Safe Maintenance
Stainless steel baffle filters snap out and go straight into the dishwasher — no hand-scrubbing mesh screens, no solvents, no special tools required.
05
90 Years of Ventilation Expertise
Vent-A-Hood has done one thing since 1933 — build range hoods. That single-category focus produces a level of engineering no full-line appliance brand can match.
Technical Documentation & Warranty
Download Installation Instructions | Download Technical Specifications
|
5-Year Limited Warranty Vent-A-Hood warrants their products to be free from defects in workmanship and materials for a period of five (5) years from the date of purchase. Labor is not included in the warranty coverage. Please refer to the manufacturer's manual for complete warranty details. |
Specs & Dimensions
Vent-A-Hood 48-Inch M-Series Range Hood (Euro-Style) |
|
|---|---|
| General Configuration | |
| Manufacturer | Vent-A-Hood |
| Class | M-Series |
| Collection Name | Vent-A-Hood Vent Hoods |
| Hood Style | Euro-Style Wall Mount |
| Mounting Type | Wall Mount / Canopy |
| Venting Type | Ducted |
| Approved For Outdoor Use | Yes (Covered Patio, GFCI Required) |
| Made in the USA | Yes |
| Blower & Performance | |
| Blower Type | Internal (M1200) |
| CFM (Cubic Feet/Min) | 1,035 CFM |
| Fan Speed Settings | 4 Speeds |
| Technology | M-Series Blower Motor with Baffle Filtration |
| Transition Included | Yes (VP566 Transition) |
| Duct Connection Size | 10" Round |
| Physical Dimensions | |
| Overall Width | 48 Inches |
| Overall Depth | 32 Inches |
| Overall Height | 18 Inches |
| Rec. Mounting Height | 30" Above Cooking Surface |
| Materials & Lighting | |
| Exterior Material | 304-Grade Stainless Steel |
| Primary Color | Stainless Steel |
| Filter Type | Industrial-Grade Stainless Steel Baffles |
| Lighting | LED with Variable 2-Level Dimming |
| Installation & Electrical | |
| Voltage | 115 Volts |
| Commercial Grade | No |
