RCS 30-Inch Cutlass Elite Built-In Gas Grill — CEG30

---

Is This the Right Grill for Your Outdoor Kitchen?

• This is the 30" Cutlass Elite — RCS's flagship built-in grill series. The Cutlass Elite is the top tier of the RCS lineup, adding color-changing illuminated knobs, 8mm Sear-Marx cooking grids, a smoker box, spring-assist hood, and an included rotisserie kit over the Cutlass Pro. If you want the most fully-equipped RCS built-in, this is it.
• Cutout required: 33" wide × 20" deep × 11" tall. Measure your island opening carefully before ordering. The 38" model requires a different cutout width. Built-in grills cannot be returned once installed into an island.
• 120V power is required at the island. The interior halogen lights and color-changing LED knobs both need a dedicated 120V connection in the grill bay. All burners, ignition, and cooking functions work without power — only the lighting and LED knobs require it.
• Field-convertible between Natural Gas and Propane. Ships set up for Natural Gas. Conversion to Propane can be done in the field without replacing the unit.
• Insulated liner required for combustible island frames. If your island uses wood framing, OSB, or other combustibles, order the LJRON30 insulated liner separately — required by the manufacturer for safe installation.

---

Key Features

• 8MM Solid Stainless Steel Sear-Marx Cooking Grids — Heavy-gauge 8mm rods create defined sear marks and retain heat across the full 840 sq. in. cooking surface. Won't chip, peel, or require seasoning like cast iron.
• 3 Cast Stainless Steel Burners — 60,000 BTU Total BTU — Cast stainless burners deliver superior heat retention and even distribution from edge to edge. 60,000 BTU across 3 main burners handles searing, smoking, and low-and-slow simultaneously across heat zones.
• 20" Stainless/Ceramic Infrared Rear Burner — 12,500 BTU — Dedicated infrared rear burner powers the included rotisserie kit. Ceramic element delivers consistent radiant heat for even rotation on whole poultry, roasts, pork shoulders, and leg of lamb.
• Color-Changing Illuminated Control Knobs (120V Required) — LED-backlit knobs confirm which burners are on at a glance in any light condition. Color cycles through multiple settings. Transformer included. Requires 120V island wiring.
• High-Intensity Interior Halogen Lights (120V Required) — Dual halogen lights illuminate the full cooking surface for accurate doneness checks at dusk or at night. Requires 120V island wiring.
• Spring-Assist Hood — Counterbalanced lid opens smoothly and stays open at any angle without a prop rod. No arm fatigue during long cook sessions when checking multiple zones repeatedly.
• Stainless Rotisserie Motor, Heavy Forks & Rod — Included — Complete rotisserie kit in the box. No separate purchase needed to run a full rotisserie setup from day one. Works over the 12,500 BTU ceramic infrared rear burner.
• Smoker Box Included — Add wood chips directly to the smoker box for smoked flavor on any cook. No standalone smoker needed.
• Briquette Flavor Trays & Heat Zone Separators — Ceramic briquettes vaporize drippings for authentic BBQ smoke flavor. Heat zone separators let you run different temperatures across the cooking surface simultaneously.
• Sure-Strike Ignition — Individual igniter per burner delivers reliable spark in cold temperatures and windy outdoor conditions where battery-powered igniters often fail.
• Full-Width Slide-Out Drip Tray — Captures drippings across the full grill width and slides out completely for cleaning without removing the grill or accessing the island underside.
• Field-Convertible NG/LP — Converts between natural gas and propane in the field as your setup changes.

---

Installation & Compatibility

The CEG30 requires a cutout of 33" wide × 20" deep × 11" tall. Compatible with aluminum stud, steel stud, and concrete block island construction. For combustible island framing (wood, OSB, plywood), order the LJRON30 insulated liner separately — required by the manufacturer.

120V electrical rough-in is required in the grill bay before the island is closed. All burner and ignition functions operate without power; only the halogen lights and LED knobs require 120V.

Compatible accessories: IR30 Infrared Sear Burner, RSSG2A Cutlass Series Griddle, RSSG4 Dual Plate Griddle. Optional drop-in cover and cart cover sold separately — see matching RCS cover SKUs for this model.

---

Warranty

Lifetime limited warranty to the original owner against manufacturing defects in materials and workmanship. Briquette trays carry a lifetime warranty. Non-transferable. Applies to residential use only. Limited to one-time replacement of defective parts — shipping and labor not covered. Original receipt required for all warranty claims. No registration required. Effective for product sales beginning April 14, 2025. Contact: [email protected].

---

Specs & Dimensions

RCS 30" Cutlass Elite Built-In Gas Grill — CEG30
Model	CEG30
Series	Cutlass Elite
Configuration	Built-In
Fuel Type	Natural Gas / Propane (Field Convertible)
Main Burners	3 Cast Stainless Steel
Main Burner BTUs	60,000 BTU
Rear Infrared Burner	1 Stainless/Ceramic — 12,500 BTU
Total Cooking Area	840 Sq. In.
Cooking Grids	8MM Solid Stainless Steel Sear-Marx
Warming Rack	Stainless Steel Lift-Away
Ignition	Sure-Strike (Per Burner)
Interior Lights	High-Intensity Halogen (120V Required)
Control Knobs	Color-Changing Illuminated LED (120V Required)
Power Required	120V
Hood	Spring-Assist
Flavor System	Ceramic Briquette Flavor Trays
Heat Zones	Heat Zone Separators Included
Drip Tray	Full-Width Slide-Out
Rotisserie Kit	Included (Motor, Heavy Forks & Rod)
Smoker Box	Included
Housing	304 Stainless Steel
Cut Out Width	33"
Cut Out Depth	20"
Cut Out Height	11"
Compatible Liner	LJRON30 (Required for Combustible Islands)
Warranty	Lifetime Limited (Original Owner)
Made in USA	No